show ipv6 source-guard binding

Syntax

• show ipv6 source-guard binding

• show ipv6 source-guard binding [interface [gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]] [WORD<0-46>]

Command Parameters

interface gigabitethernet {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Displays the IPv6 addresses that are allowed on the specified IP Source Guard port.

Identifies the slot and port in one of the following formats:

• a single slot and port (slot/port)

• a range of slots and ports (slot/port-slot/port)

• a series of slots and ports (slot/port,slot/port,slot/port)

• all ports on the same slot (slot/all)

• all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

WORD<0-46>

Specifies the IPv6 address bindings for the specified IPv6 address.

Default

None

Command Mode

User EXEC